Pool Test / Survey

Please complete test and survey below.

Test is not graded or recorded and all comments are anonymous.

Which types of filters require backwashing?

Cartridge and SandGravel and CartridgeDE and CartridgeSand and Diatomaceous Earth

What outlets are allowed within 10 feet of the pool edge?

GFCI protected and for pool equipment onlyAny, as long as they are GFCI protectedNo outlets for any reason, regardless of GFCI protectedAny, but have to be GFCI protected and no closer than 6 feet.

If the property (in Arizona) has a pool, is a pool inspection required?

Only if it is an in-ground pool.No, as long as the buyer does not want it inspected.Yes, the Arizona Board of Technical Registration requires it.Yes, but not if it is an above ground pool or spa

What distinguishes a pool from a body of water?

If there is a pump, it is a pool.it is a pool if the water is filtered, treated, and heatedIf it is 18 inches (AZBTR) / 42 Inches (InterNACHI) and is intended for swimming.If it is 42 inches (ASHI) / 18 inches (InterNACHI), regardless of intent.

What moves the water in a pump?

The propellerThe motor shaftThe impellerThe volute

Where is the highest concentration of contaminates in the pool?

The floorThe wallsThe stepsThe surface

The door that allows debris into the skimmer but prevents it from leaving is called ______

A weir doorAn anti back flow doorThe skimmer doorA backwash door

The Virginia Graeme Baker Pool and Spa Safety Act focuses on which safety component of the pool?

Fencing/accessDrainsGFCI and ElectricalPool covers

A gate vale is the preferred type of valve, Why?

It is the most durableIt has the ability to be used in any position fully or partially opened/closedThe valve is able to handle the constant fluctuations in pressure associated with a pool.A gate valve is not the preferred valve, and is not designed to be used in a partially opened position.

What is the clearance of a light, ceiling fan, radiant heater over the pool?

12 feet vertical, 5 feet horizontal8 feet vertical, 3 feet horizontal22.5 feet vertical, 10 feet horizontal5 feet vertical, 10 feet horizontal

What is the recommended size of water heater?

100 BTUs per 10 Sq. Ft. of pool surface per 1 degree rise1000 BTUs per 100 Sq. Ft. of pool surface per 1 degree riseOne Ton per every 400-500 Sq.Ft. surface areaSize is irrelevant, time is only variable when heating a pool/spa.

What is the most important factor in achieving a balanced water chemistry?

TemperaturepHAlkalinityTDS, Total Dissolved Solids

What does a cubic foot of water weigh?

7.5 pounds8.3 pounds7.5 gallons of water in cubic foot X 8.3 pounds per gallon = 62.25 Pounds8.3 gallons of water in cubic foot X 7.5 pounds per gallon = 26.25 Pounds

If a pool is drained, can you inspect the pool?

Yes, but only run equipment briefly to prevent damage.Yes, but do not run any equipment.No.

What is considered the ideal temperatures for a pool / spa?

100°80° ±2° / 104°77° / 105°80° / 120° ±2°

How did you attend the class

Optional

Rate the class

Content, layout, material

Rate the instructor

Presentation, delivery, knowledge

Comments (required)

Please provide some feedback. Criticism helps us to improve and provide the best path to correct any undesirable results. Constructive criticism with solutions is preferred but not required.